Smart meter with P1 port

Through the P1 port, your smart meter sends the current import and/or export and the meter readings to the CEMM. You can connect the meter in one of two ways.

Connecting

Your situationWith the P1 cable on port 1

The P1 cable is supplied with the CEMM.

  1. Connect the P1 cable to the P1 port of the smart meter.
  2. Connect the other end to port 1 of the CEMM.
Your situationWith a P1-USB cable on a USB port

Use a P1-USB cable if port 1 is already in use.

  1. Connect the P1 end of the cable to the P1 port of the smart meter.
  2. Connect the USB end to a USB port of the CEMM.

Adding the meter

  1. In the portal or the app, go to Settings › Meters and click Add meter.
  2. Choose Smart meter and then Dutch or Belgian.
  3. Choose the port you connected the meter to: Port 1 for the P1 cable, or USB for the P1-USB cable.
  4. Complete the rest of the wizard.
Your situationI also want to log voltage or power per phase

In addition to consumption and meter readings, the CEMM can log extra data from the smart meter, such as the voltage and power per phase. How to log extra data.

Your situationI have a Belgian digital meter

On Belgian digital meters, the P1 port (the user port) is disabled by default. First activate the port through your grid operator, for example in Mijn Fluvius. Then follow the steps above.

Problem?I don't see any meter readings
  • Check that the cable is firmly connected at both ends.
  • Check that you chose the correct port in the wizard: Port 1 or USB.
  • Still no data coming in? Ask your grid operator whether the P1 port is enabled.

Still stuck? Contact support